Your order confirmation is just a phone call away!

Thomas Aichem
Sales
KERL AJS 25 accepts all standard 25 mm thick wooden support laths, aluminum or steel bent boards and is used for positive locking. It is part of the allsafe CTD system and is used to accommodate bent boards or lashing battens, which are inserted into the KERL AJS 25 and thus hooked into the stanchion. The fitting can be inserted and removed at any point on the track with just one hand. The load capacity* in the Z-direction is 1000 daN and in the Y-direction 400 daN.
512191 | Galvanized steel
Available in the following packaging units:
4 pieces / 12 pieces / 40 pieces
Thomas Aichem
Sales