Your order confirmation is just a phone call away!
Jacqueline Nutz
Sales
Send us yourenquiry
Screw Fittings
The screw fittings from allsafe are suitable for connecting fixtures and attachments to airline tracks with ø20 bore hole and 25 mm or 25.4 mm pitch. It enables the fixed assembly as well as the trackless disassembly of fixtures. The high-strength material and high load-bearing capacity allow you to place fixtures in the vehicle at different locations or remove them when not in use.
On this page
Screw Fittings
allsafe offers a variety of screw fittings, which are available with M8 or M10 thread, with or without screw handle and in different lengths.
KERL M6 x 2 | x 10 | x 20 | x 30
Section: Individuell 
The length indicates the clamping range K(sketch) in standard tracks.
For other tracks the clamping range varies +/- 2mm.
KERL M8 x 4S | x 12S | x 22S | x 32S
Section: Individuell 
The length indicates the clamping range K(sketch) in standard tracks.
For other tracks the clamping range varies +/- 2mm.
KERL M8 x 20 S slide
Section: Individuell 
The length indicates the clamping range K(sketch) in standard tracks.
For other tracks, the clamping range varies +/- 2mm.
KERL M10 x 5 | x 12 | x 22 | x 32 | x 52
Section: Individuell 
The length indicates the clamping range K(sketch) in standard tracks.
For other tracks the clamping range varies +/- 2mm.
KERL M10 x 5S | x 12S | x 22S | x 32S | x 52S
Section: Individuell 
The length indicates the clamping range K(sketch) in standard tracks.
For other tracks the clamping range varies +/- 2mm.
KERL with internal thread
Section: Individuell 
An internal thread wherever you need it. And if you need it somewhere else tomorrow?
Then simply push the KERL JIM M8 there. Or you can remove it from the airline rail with a flick of the wrist.
KERL JIM M8 does not rattle, does not fall out of the airline rail unintentionally and does not protrude. A little fastening genius!