Screw fittings with threaded bolts

The screw fittings from allsafe are suitable for connecting fixtures and attachments to airline tracks with ø20 bore hole and 25 mm or 25.4 mm pitch. It enables the fixed assembly as well as the trackless disassembly of fixtures. The high-strength material and high load-bearing capacity allow you to place fixtures in the vehicle at different locations or remove them when not in use.

Our screw fittings with threaded bolts are available with M8 or M10 threads.

Kerl Schraubfitting Anwendung 1 Kerl Schraubfitting Anwendung 2
Kerl Schraubfitting Anwendung 1 Kerl Schraubfitting Anwendung 2
The product in detail

Variants

KERL M8 x 2 | x 6 | x 10 | x 20 | x 30

310002
The length indicates the clamping range K(sketch) in standard tracks*. For other tracks the clamping range varies +/- 2mm.

  • 200 daN load capacity in X-direction
  • 200 daN loadable in Y-direction
  • 1000 daN loadable in Z-direction
31102-10 M8x2* L24 K 0-2
31102-19 M8x6* L24 K 0-6
31102-20 M8x10* L30 K 0-10
31102-21 M8x20* L40 K 0-20
31102-22 M8x30* L50 K 0-30
Buy now
310002 20
Kerl M8 310002 Bemasst
310002 Kerl M8x7 Anwendung

KERL M8 x 4S | x 12S | x 22S | x 32S

310276
The length indicates the clamping range K (sketch) installed in standard rails*. For other rails, the clamping range varies +/- 2 mm.

  • 200 daN load capacity in X-direction
  • 200 daN loadable in Y-direction
  • 1000 daN loadable in Z-direction
310276-47 M8x4S* K 0-4
310276-48 M8x12S* K 0-12
310276-49 M8x22S* K 0-22
310276-50 M8x32S* K 0-32

 

Buy now
310276 50
Kerl M8 310276 Bemasst
310276 Kerl M8x29 S Anwendung

KERL M8 x 24 S slide

511330
The length indicates the clamping range K (sketch) installed in standard tracks*. For other rails, the clamping range varies +/- 2mm.

  • 1000 daN loadable in Y-direction
  • 1000 daN loadable in Z-direction
511330-10 M8x24S* K 3-24
Buy now
511330 10
511330 10 Ker M8 20 Vermasst
511330 10 Anwendung

KERL M10 x 5 | x 12 | x 22 | x 32 | x 52

510003

The length indicates the clamping range K (sketch) installed in standard tracks*. For other tracks, the clamping range varies +/- 2 mm.

  • 500 daN loadable in X-direction
  • 500 daN loadable in Y-direction
  • 2000 daN loadable in Z-direction
510003-09 M10x5* L23 K 0-5
510003-10 M10x12* L30 K 0-12
510003-20 M10x22* L40 K 0-22
510003-30 M10x32* L50 K 0-32
510003-40 M10x52* L70 K 0-52
Buy now
510003 20 Neu
Kerl M10 510003 Bemasst
Kerl M10x7 Anwendung

KERL M10 x 5S | x 12S | x 22S | x 32S | x 52S

510001
The length indicates the clamping range K (sketch) installed in standard rails*. For other rails, the clamping range varies +/- 2mm.

  • 500 daN loadable in X-direction
  • 500 daN loadable in Y-direction
  • 2000 daN loadable in Z-direction
510001-10 M10x5S* K 0-5
510001-20 M10x12S* K 7-12
510001-30 M10x22S* K 13-22
510001-40 M10x32S* K 23-32
510001-50 M10x52S* K 44-52
Buy now
510001 10
Kerl M10 510001 Bemasst
Kerl M10x7 S Anwendung