Your order confirmation is just a phone call away!
Cornelie Kühnle
Sales
Send us your enquiry
TransSAFE®net+
TransSAFE® net+ are versatile net systems that can be used to secure a wide variety of loads. These nets can be used to form a cargo unit by positive locking and can be lashed down if required. A net that can do everything! The nets from allsafe are extremely flexible and adapt to specific requirements. The TransSAFE® net+ can be attached to airline tracks and lashing points that are present in the vehicle.
You customize your net not only technically, but also aesthetically. You can choose the size, color, fittings and locks to suit your transport task and your vehicle.Each net is made of high-quality strap individually adapted to your requirements.
Together, we will configure the right net for your vehicle and your transport task - feel free to call us!
On this page
Dimensions & Color
Select your color of choice
Not all colors are available for all locks
Blue
Red
Grey
Black
Olive
Orange
Green
Yellow
Select the dimensions of the net:
Long and short side in mm
Depending on the selected mesh size, the total dimension may not be achieved exactly by calculation.
Select the dimensions of the mesh:
Mesh size long and short side in mm
A small mesh size of 150-200 mm has proven to work well, a minimum of 100 mm is possible.
Mounting
Choose different fastening options, such as sewn-on ratchet straps, locks or different fittings in the corners or on the edges of the net.
Sewn-on ratchet straps in the corners
For tying down. You have the choice:
- Ratchet strap blue, with carabiner clips
- Ratchet strap grey, with carabiner clips
- Ratchet strap blue, with KERL 500 fitting for airline track
- Ratchet belt grey, with KERL 500 fitting for airline track
Type and Quantity of Locks
Select your ideal lock from the selection on the next page. Past a net size of about 2500 x 1500 mm we recommend a second lock.
Corner Fittings
From the fittings on the next page, select your ideal fitting for the four corners of your TransSAFE® net+.
Additional Corner Fittings
You have the option of configuring additional fittings in every 2nd, 3rd or 4th field. (Only possible with fittings at the corners.)
You can choose from the fittings listed below
Locks
71234
- LC 400 daN*
71036
- LC 1000 daN*
512132-10
- LC 250 daN
512132-20
- LC 250 daN
Fittings
71026
- For Lashing eyelets and Lashing grooves
- LC 750 daN*
511275
- For Airline Tracks
- LC 300 daN*
310275
- For Airline Tracks
- LC 500 daN*
71028
- For Lashing eyelets and Lashing grooves
- LC 1100 daN*
71104
- For Lashing eyelets and Lashing grooves
- LC 1250 daN*
* The specification refers to the load-bearing capacity of the entire net under areal load, the smaller value of lock/fitting applies.